[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Interface Aliases...



from the ifconfig man page.


    plumb Open the device associated with the physi
           name  and set up the streams needed for  
           device. When used with a logical interfac
           command  is  used  to  create a specific 
           interface. An interface must be separatel
           use  by  IPv4  and  IPv6. The address_fam
           controls whether the ifconfig command app
           or IPv6.

            Before an interface has been plumbed, , 
           will not show up in the output of the ifc
           mand.

> plumb?
> 
> Koree
> 
> ____________________________________
> Koree A. Smith  | Ameth Technologies
> koree@koree.net | koree@ameth.org
>      http://www.koree.net/
> 
> I was walkin' down the street,
> when I thought I heard this voice say,
> "Say, ain't we walkin' down the same street,
> together on the very same day",
> And I said,
> "Hey senorita, that's astute", I said,
> "Why don't we get together and call ourselves an institute"
> 
> 
> On Mon, 11 Nov 2002 fiaid@quasi-sane.com wrote:
> 
> > ifconfig eth0:1 plumb
> >
> > do that.
> >
> > tighe
> >
> > > Okay, so I used to be able to do aliased Ethernet interfaces.  But, it
> > > appears I'm not able to do so now.  Here's sample output:
> > >
> > > ether:~ # ifconfig eth0:1 up
> > > SIOCSIFFLAGS: No such device
> > > ether:~ # ifconfig eth0:1
> > > eth0:1    Link encap:Ethernet  HWaddr 00:20:18:2C:F6:24
> > >           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > >           Interrupt:12 Base address:0x6800
> > >
> > > ether:~ # ifconfig eth0:1 up
> > > SIOCSIFFLAGS: No such device
> > >
> > >
> > > It used to be as simple as "ifconfig eth0:1 ip_address", but alas, it is
> > > not working.  I have this working on another machine, running the same
> > > version of everything (both are SuSE 6.4).  Any ideas WTF I'm doing wrong?
> > >
> > > Koree
> > >
> > > ____________________________________
> > > Koree A. Smith  | Ameth Technologies
> > > koree@koree.net | koree@ameth.org
> > >      http://www.koree.net/
> > >
> > > I was walkin' down the street,
> > > when I thought I heard this voice say,
> > > "Say, ain't we walkin' down the same street,
> > > together on the very same day",
> > > And I said,
> > > "Hey senorita, that's astute", I said,
> > > "Why don't we get together and call ourselves an institute"
> > >
> > >
> > >
> > > -
> > > To unsubscribe, send email to majordomo@silug.org with
> > > "unsubscribe silug-discuss" in the body.
> > >
> >
> > --
> > Tighe Schlottog         workape         fiaid
> > "Nothing is too cruel if it is funny enough."
> >
> >
> > -
> > To unsubscribe, send email to majordomo@silug.org with
> > "unsubscribe silug-discuss" in the body.
> >
> 
> 
> -
> To unsubscribe, send email to majordomo@silug.org with
> "unsubscribe silug-discuss" in the body.
> 

-- 
Tighe Schlottog         workape         fiaid
"Nothing is too cruel if it is funny enough."


-
To unsubscribe, send email to majordomo@silug.org with
"unsubscribe silug-discuss" in the body.